Recent Jobs For Sterling Pool Service

September 30, 2016 | Dallas, TX

Our owner went to see about this problem and had to expose the leak on the pool return tee to repair it then checked and balanced chemicals. There is no more leak and they are happy.

September 29, 2016 | Garland, TX

Our technician went out and found the filter needed to be cleaned and there was a leak at the pool sweep pump. He performed a filter clean service and replaced the hose plumbing kit on the Polaris pump. After the filter clean, the pump sounded normal again.

September 29, 2016 | Dallas, TX

We replaced a capacitor that was still under warranty, so it was replaced at no charge. They also needed to have a filter clean done and pressure gauge replaced that they had bought.

September 27, 2016 | Wylie, TX

We performed a filter clean service. We also had to replace 8 filter grids and the bottom grid holder (bottom manifold) in order for the filter to run properly.

September 27, 2016 | Rowlett, TX

We made it out there quickly and had to install a new seal and O-ring on the pool sweep booster pump.

September 26, 2016 | Dallas, TX

Our owner went to investigate the problem and found it needed new fittings. Those had to be ordered. After they arrived, we went back to install the fittings and check the operation. The ozonator worked as it should after this was done.

September 23, 2016 | Rowlett, TX

Our owner went to investigate the leak and submitted a bid for repairing it. They responded to our bid by asking us to bid replacing their equipment pad, pool filter pump, pool cleaner booster pump, new Jandy valves, and piping. They approved our bid for what they had asked and ...

September 21, 2016 | Allen, TX

Our Technician went out to investigate. He found it was due to a dirty, dirty filter. He performed a filter clean and replaced the top manifold in the filter. This solved their chlorine problem.

September 15, 2016 | Plano, TX

Our owner scheduled this service and completed the filter clean.

September 15, 2016 | Rowlett, TX

Our owner went to check on this problem and had to install a new cartridge filter bottom. The crack was irreparable. Now, the pool has stopped leaking.

September 8, 2016 | Dallas, TX

Upon arrival to investigate, we saw the pump needed attention. We replaced the pool pump seal and O-ring. Soon thereafter, the water level returned to normal.

September 7, 2016 | Plano, TX

Upon inspection by our technicians, the sweep pump (booster) just needed to be repaired. We also found the timer was not set correctly and changed the system to run the correct amount of hours. We repaired the sweep pump on the first visit.

September 7, 2016 | Sachse, TX

We investigated and found that the issue was only the pool pump timer. It was replaced and we set it to run correctly. The pool began working perfectly.

September 7, 2016 | Sachse, TX

We found the housing bracket was bad. We replaced the pool pump housing bracket and the pump motor ran as intended.

September 7, 2016 | Parker, TX

We went to evaluate the filter and found his cartridges were worn out and needed replacing. After replacing them, all worked well.