Recent Jobs For Sterling Pool Service

April 26, 2016 | Sachse, TX

We installed a timer mechanism for the pool pump and one for sweep pump. He contacted us a month later and stated he was impressed with our knowledge of the pool industry and began using us for weekly cleaning & maintenance as well.

April 26, 2016 | Dallas, TX

Our tech went to evaluate and found that the filter pump is leaking. He replaced the pool pump seal and O-ring and that fixed their leak.

April 20, 2016 | Murphy, TX

We repaired the pool valve, replaced the pool motor, cleaned the pool, and installed a new Polaris tail and back-up valve, and installed two timer trippers.

April 13, 2016 | Murphy, TX

Our owner went out to evaluate his pool and also found a leak at the pool pump. He replaced the seal and gasket in the pump and we cleaned the pool. The customer is very happy. He said it looks like the storms never happened.

April 12, 2016 | Plano, TX

Kevin, the owner, went to his house and found that the leak is happening through the skimmer throats, and the lack of circulation is due to his filter needing to be taken apart and cleaned. We sealed both of his skimmer throats with epoxy to stop the leaks, then cleaned ...

April 8, 2016 | Murphy, TX

We went out to evaluate her problems and ended up repairing the valves, pool sweep pump, put on a new Polaris tail, installed timer trippers on the time clock, and did a one-time clean on her pool.

April 8, 2016 | Murphy, TX

We went to evaluate Billy's pool and found the valves needed to be repaired and the sweep pump needed to be replaced. We repaired the Polaris tail and installed timer trippers on time clock. We also performed a one-time clean on the pool. They were glad for our help and ...

April 7, 2016 | Dallas, TX

After looking at her system, we installed a new pump motor, seal plate, impeller, seal, O-ring and motor base. It’s working well now and she is happy.

April 7, 2016 | Richardson, TX

These are long-term customers of ours and every year they call to get the pool cleaned up for spring. We also did a filter clean.

April 5, 2016 | Murphy, TX

Our owner went to evaluate the damage. He had to replace O-rings in five valves then installed a new Jandy 2-hp blower and pool sweep pump hose kit as a result of the hail damage. Now, it's all in top working order.

April 5, 2016 | Sachse, TX

Our technician disabled the time clock so that it would not run and cause any damage. Then, we installed a new time clock for the pool equipment. As a result, the system is once again running fine.

March 21, 2016 | Plano, TX

We installed a new pump motor, seal, and gasket for the waterfall. The pool pump seal plate and mounting bolts had to be replaced. We also found the filter and salt cell needed to be cleaned. After we did all of this, the pool worked perfectly.

March 15, 2016 | Wylie, TX

We went out the next day and diagnosed it was very old and needed to be replaced. They approved us installing a new 2.5-HP pool pump.

March 10, 2016 | Wylie, TX

Instead of being a major issue, the problem was a simple one. The capacitor was bad. We installed a new one, and the system was up and running quickly.

March 3, 2016 | Dallas, TX

This pool pump had a history of leaks, which the homeowner had us repair a couple of times. It finally reached a point that a new pool pump was needed.  At this time we were also able to install a new 3-way Jandy valve and backwash valve. Since the filter ...