Recent Jobs For Sterling Pool Service

April 24, 2017 | Dallas, TX

We took the heater apart and found a rodent nest on the top and bottom inside of the heater. We cleaned the pool heater out and it works fine.

April 21, 2017 | Plano, TX

Our owner made the trip to his house to investigate the problem. He found an obstruction due to tree roots invading the backwash line underground. The section of obstructed PVC pipe was dug up and removed so a new section could be installed.

April 20, 2017 | Wylie, TX

A technician went to bid this job and, when looking over his pool and equipment, our tech found his filter backwash valve was leaking. There were related plumbing issues. We had to order parts and asked Sean to clean up his yard around the equipment to be sure there are ...

April 20, 2017 | Garland, TX

We re-plumbed the pool pump discharge. After that, everything worked properly.

April 19, 2017 | Garland, TX

We gave a bid to repair her Polaris 280, which included a driveshaft, driveshaft bearings, one wheel, and a Polaris tail clip. We also provided a bid for a new Polaris 280 pool cleaner. Because of financial reasons, she declined the bids.

April 17, 2017 | Allen, TX

We installed a new timer with a freeze protector combo. This solved the issue.

April 13, 2017 | Dallas, TX

After a quick inspection, we installed a new motor seal and gasket on the pool pump. We also had to install a pool pump impeller and diffuser.

April 11, 2017 | Richardson, TX

Our pool cleaning technician reported the pool pump was not working and that the impeller was broken. We replaced the impeller, seal, and gasket on the pump for the pool. We also evaluated the components on the pump to be sure everything was OK.

April 11, 2017 | Richardson, TX

Our pool cleaning technician reported the pool pump was not working and that the impeller was broken. We replaced the impeller, Seal and gasket on the pump for the pool. We also evaluated the components on the pump to be sure everything was OK.

April 11, 2017 | Murphy, TX

We found he needed dual drains in the spa to meet city code requirements. He also wanted a bid for new tile for his pool and spa, as well as coping, Replaster in Quartzscapes, and deco-seal. Due to budget, he chose to have us install the spa dual drains and ...

April 10, 2017 | Sachse, TX

We installed a new salt system, including the controller, and a salt cell. Everything works fine now.

April 5, 2017 | Plano, TX

Our owner went to see about this and advised her that we need to replace her pool pump lid O-ring, as well as two drain plug O-rings. Doing this stopped the blowback but several leaks popped up. To completely seal the system, we had to replace four return valves and ...

April 4, 2017 | Garland, TX

Our owner went to diagnose her filter and pump problems. Her filter turned out to be fine. Nothing was broken. All it needed was to be taken apart and cleaned. Her pool pump motor, however, had to be replaced as it was a fire hazard.

April 4, 2017 | Dallas, TX

We remove the pump and filter is from the equipment pad and installed a new 30" x 48" pad. We then reset the pump installed a new 36 ft.² DE filter and backwash valve, and a backwash hose to extend to the yard. We had to re-plumb the equipment to include a new ...

March 30, 2017 | Allen, TX

Our owner went to investigate the problems. We had to replace the filter tank o-ring, filter drain plugs and the top half of filter. After doing this, all the leaks stopped.